Login for Medialink WiFi Router

If you have a Medialink router, you must be aware of how to log in and access the Medialinkessary settings. You can access the router’s Admin Panel, which contains all of the router’s and WiFi network’s settings, by signing into Medialink Router. Only there will you be able to customize every aspect of your Medialink Router.

Table of Contents

How do I sign in to my Medialink Router?

The Medialink wifi gateway login Router. You can do that by utilizing an Ethernet cable or by joining the Medialink router login username and password Router’s WiFi network. Follow these instructions to access your Medialink router login Router’s web-based control page once your PC is linked to it:

  • Launch a web browser, enter in the address bar to access the router’s default IP address, and then hit Enter. 

Note: If the IP address shown above does not work, try visiting:

  • You will be directed to a login page where you must enter your login username and password in order to proceed. The default username and password for the majority of Medialink router models are:
  • Login name: admin
  • Admin@Medialink.com or Admin@Medialink is the password.
  • Click on Login after entering this login information. (If these login credentials are ineffective, see our list of IP addresses and passwords for default routers.)
  • You have successfully logged into the admin panel for your Medialink default login router.

You’ve forgotten your login password?

You may access the router’s admin panel using the default login Medialink username and password router, and once there, you can modify and customize the login information as needed. However, some people who modify the login username and password then forget it, making it impossible for them to access the router’s admin panel and settings anymore.

A straightforward fix for this is to conduct a router factory reset if you find yourself in a position like this. Every setting, including any altered username or password, is restored to its factory defaults after performing a factory reset. To factory reset your log into my Medialink router password default, follow these steps:

  • On the router’s rear, look for the little RESET button.
  • Take a paperclip or pin, turn on your router, and press and hold the RESET button for about 5 seconds before letting go.
  • The LED lights will flicker, shut off, and restart the router.
  • Everything will return to factory defaults once the router restarts.

Having trouble getting to the router login page?

Here are a few potential causes for your inability to access the router login page:

  • Possible conMedialinktivity issues with the default login Medialink router exist. Ensure that your Medialink router ip login router is linked to the internet, either wirelessly or with an Ethernet cable.
  • The IP address you are typing is incorrect. Verify that you are entering the IP address in the address bar correctly.
  • Your router’s default gateway address might not be or Instead of using, use the default gateway IP for your router.

All of the aforementioned techniques didn’t work for me!

Resetting your modem is all that is required. You may easily accomplish this by pressing the reset button on the bottom or back of your router. Your modem will return to factory settings if you press and hold this tiny button for about 20 seconds (you might need a toothpick for this). You should be aware that resetting your modem will result in the loss of your internet conMedialinktion. Therefore, it is preferable to strive an expert’s guidance in this region.

See also  REET Result 2023 Link Out @ reetbser2023.in Level 1 & 2 Score Card PDF Download

NOTE – If you don’t have adequate expertise, it is plainly advised that you seek assistance from someone who is fully knowledgeable about the subject.

permutations of the default username and password for Medialink routers

The most common how to access my Medialink router gateway login default IP username and password combinations are shown in the list below. The default Medialink router login router admin password username and password router stated at the start of this guide occasionally don’t work. To gain entrance to your wireless router, test the username/password mixtures shown below.

My Medialink router’s default login IPs

To modify security settings, you occasionally need your router’s web interface IP address. Most individuals are unaware of their router’s IP address. This Medialink wifi setup password IP address is often located on the back or bottom of your router equipment. However, there are a few ways to obtain the router IP if you can’t find it on your router or in the user manual. Below is a list of all Medialink router default admin password router default login IP addresses that are currently known.

Most Recent Frequently Asked Question

How do I log into Medialink hg8145v5 router?

  • Your web browser should now display the default IP address (
  • Use your default login and password to access the configuration page of your router, which is TIME followed by the final four digits of your wireless key (for example, TIME1234).
  • Visit My WiFi.
  • Click Apply after setting the SSID and WLAN password, respectively.

How do I find my Medialink router password?

Join the Wi-Fi network of the router using your phone. On your phone, navigate to Tools > Advanced settings in the Medialink default router password AI Life App. To view your current default how to log into my Medialink router password, navigate to My Wi-Fi > Wi-Fi settings and tap the icon next to the Wi-Fi network password.

How can I login to my router?

On the network name, tap. Search the list for a “gateway,” “router,” or other entry.

Locate the router’s IP address on iOS or Android

  • Click Wi-Fi.
  • Ensure that the Wi-Fi network conMedialinkted to your router is active on your phone.
  • To the right of the network name, tap the I
  • The word “Router” is followed by your router’s IP address.

How do I access my Medialink router settings?

  • Open a new browser tab and navigate to the router’s IP address. The router’s configuration can be accessed at by default. (If port 80 has been forwarded to another device, the address changes to
  • Click Basic on the left-hand panel.
  • On the expanded menu, select DHCP.

What is the Medialink admin password?

Medialink router default login User Manual

Your Medialink default ip router default username and password router’s default username is admin. The admin password is the default.

How do I reset my Medialink router username and password?

  • Use an Ethernet cable to conMedialinkt your computer to the CPE’s LAN port or the CPE’s Wi-Fi. Enter 192.168. …
  • Enter the current password, the new password, and the confirmation password under Advanced > System > Modify Password before clicking Save.

How do I manage Wi-Fi on my Medialink router?

  • Your phone should be conMedialinkted to mobile WiFi. Enter 192.168. …
  • Select Wi-Fi MAC Filter under Advanced > Wi-Fi. Turn on Wi-Fi MAC Filter.
  • To add Wi-Fi devices to the Wi-Fi MAC address list, click, set Filter mode to Block or Allow, and then click. Next, select Save.

Is there a Medialink router app?

You can simply access, configure, and control your routers using the Medialink gateway login username AI Life App’s comprehensive set of management and configuration tools.

How do I configure my Medialink router app?

Set up your routers using the app

The Wi-Fi name of your conMedialinkted router is located at the bottom of the device. Go to CONFIGURE > SET UP in the Medialink gateway username and password AI Life app after launching it. Touch the Add button in the top right corner of the app’s home screen if a notification prompt is absent.

What is the IP address of Medialink router?

On the computer, launch a browser, type the default IP address,, and hit Enter. As seen in Figures 1-3, the AR router’s web login page is presented.

What is the default IP address for a Medialink router?

On the computer, launch a browser, type the login to Medialink modem default IP address,, and hit Enter.

How do I open my Medialink router?

On your computer or phone, launch an internet browser. In the default Medialink router login password gateway login address bar of your browser, type and press the Enter key. Enter your router’s login information in the login window, then click Log In.

What is Medialink router username and password?

Medialink Router User Manual

Your Medialink modem router login router’s default username is admin. The admin password is the default.

Can’t conMedialinkt to Medialink router?

Ensure your password is accurate and that Wi-Fi is turned on. Turn the gadget off and restart it. ReconMedialinkt to the Wi-Fi network after forgetting it.

Open the portal again:

  • To turn it off, press the power button on the back.
  • 30 seconds after unplugging the power cord.
  • Replug it in.
  • To activate it, press the power button.

What is Medialink default PIN?

The T-Mobile-provided 1234 PIN code is the default PIN code if you forget the SIM lock on your how to enter wps pin on Medialink router modem default ip.

What will happen if I reset my Medialink router?

Important data, including the Wi-Fi name and password, will be kept after the router is reset to factory settings if you choose to Retain network settings after the factory reset. Restoring the router to its factory settings twice can erase all configurations if you don’t need to keep any settings.

How do I reset my Medialink Wi-Fi router?

Turn on the router and press and hold the reset hole with a sharp implement (such as a needle). If the indicator blinks, release. The Medialink router default ip is reset to its factory defaults after restarting.

How do I conMedialinkt my Medialink to Wi-Fi?

  • Select Settings. Images might not be exactly as depicted.
  • Touch networks & wireless. Images might not be exactly as depicted.
  • Simply tap WiFi.
  • Touch the Wi-Fi slider to activate it if it’s not already.
  • The Wi-Fi network you want to use is touched.
  • The network password must be entered.
  • Press CONMedialinkT.
See also  Justine Ezarik Wiki, Biography, Age, Height, Weight, Boyfriend, Family, Net Worth, Affair

How can I change my Medialink 192.168 8.1 password?

To reach the CPE management page, type into the URL bar of the browser and then the change my Medialink router password. Enter the current password, the new password, and the confirmation password under Advanced > System > Modify Password before clicking Save.

How do I change my Medialink router username and password?

Open the admin password for Medialink router AI Life App, tap the appropriate router, and you will be taken to the router management screen. then select Medialink modem login Wi-Fi management > Show more > Wi-Fi. In the Wi-Fi name (Supports Chinese) and Wi-Fi password areas, enter a new Wi-Fi name and password. Then, touch √ the top right corner of the screen to confirm.

What is the default username and password for Medialink Router eg8145v5?

Epuser and users are the standard Medialink modem login default router username password for regular users.

What is the WPS button on Medialink router?

It is simple to join your device to the Medialink router log into Medialink modem default router admin username and password using the H or WPS buttons on the router. To conMedialinkt instantly without needing to input a Medialink default username and password, press the H or WPS button. Only devices that support WPS are compatible with this feature (iOS devices do not support this feature).

How do I connect to Medialink?

Login for Medialink Router

  • Connect your laptop or computer to the router cable. Use your wireless network as an alternative.
  • Open your preferred web browser, then type the Medialink router’s IP address into the address bar.
  • By using the admin panel, access your router’s default login and password.

How do I update my MediaLink router firmware?

How to update your router’s firmware

  • Sign in to your router in step one. …
  • Step 2: Ascertain the firmware version of the router. …
  • Step 3: Ascertain the most recent firmware release. …
  • Download the newest firmware in step four. …
  • Upload the updated firmware to your router in step 5. …
  • Step 6: Watch for the miracle to occur.

Who is MediaLink?

Many businesses employ MediaLink, a strategic consultancy firm, yet very few people are familiar with it.

What type of company is MediaLink?

strategic advisory firm
An organisation called MediaLink offers strategic consulting and implementation services to businesses of all sizes.

How do I setup my Medialink Wireless Router?

Login for Medialink Router

  • Connect your laptop or computer to the router cable. Use your wireless network as an alternative.
  • Open your preferred web browser, then type the Medialink router’s IP address into the address bar.
  • By using the admin panel, access your router’s default login and password.

How do I find my Medialink password?

Guide for Medialink Router Login

Two text fields with spaces for a username and a password should be visible. Your Medialink router’s default username is admin. The admin password is the default. You should now be able to access your router’s control panel after entering the username and password and pressing “Enter.”

How do I reset my Medialink router?

Medialink Routers Help
Attempt a hard reset of the router login. Press and hold the little black button on the router’s rear for approximately 10 seconds to accomplish this. Your router will be reset to its default settings with this.

How do I login to my Medialink router?

Type To access the router’s web-based user interface, type IP address 8.1 (the most typical Medialink router IP address) in the address bar of your web browser. Two text fields with spaces for a username and a password should be visible. Your Medialink router’s default username is admin.

How to log into Medialink router?

Medialink username and password for router Wireless Gateway Admin ToolConMedialinkt a computer, tablet or phone to your network. You can either use WiFi or hook up an Ethernet cable to your Gateway. Open a web browser and go to the Admin Tool ( This is the Wireless Gateway’s administration site.

How can I change my Medialink 192.168 100.1 Wi-Fi password?

How to modify 192.168.100’s SSID and password. 1

  • Access your online management page by logging in.
  • Select Wi-Fi Settings > Wi-Fi Basic Settings after logging in (If you want to change settings individually for 2.4 GHz and 5 GHz, you can go to Advanced settings).
  • Enter a new name in the Wi-Fi name (SSID).

How can I change my Medialink b315s 607 Wi-Fi password?

Select Modify Medialink modem username and password router admin username and password and input your new password in the WLAN Key box as shown below to update your Wi-Fi password. After entering the password, select next. It will proceed to Update Configuration; select Next and keep Auto-Update selected.

How do my Medialink to WPS?

To enable the WPS option, scroll down the menu on your mobile WiFi by pressing the MENU button. Enable WPS conMedialinktion in the Wi-Fi settings on your phone. Go to Settings > Wireless & networks > WLAN > More > Advanced WLAN settings > WPS conMedialinktion if you are using a Medialink phone with EMUI 8.1.

How do I log into my Medialink router?

Make sure you are conMedialinkted to your Medialink network before attempting to enter into your Comcast Medialink modem router. Then, in any browser, type and press Enter. Use “admin” as the user name and “password” as the password to log in.

What is the default Medialink router login?

If you haven’t modified your Admin Tool login settings, they are as follows: Administrative user. Login: password (case sensitive)

How do I find my Medialink router admin password?

How to Reset an Medialink Router Admin Password if Forgotten

Press and hold the reset button on the back of your Medialink Router for 30 seconds, then let go to reset the admin password.

The admin credentials and the router will both be reset to factory defaults.

What is the Medialink router IP address?

Typically, Medialink routers have one of the following default IP addresses: “,” “,” or “”

How do I change my Medialink router settings?

Using Medialink xFi

  1. Open the Medialink app and sign in with your Medialink ID and password.
  2. Go to the ConMedialinkt tab.
  3. Select your network.
  4. Select Advanced Settings.
  5. Select 2.4 and 5 GHz WiFi.
  6. Select Edit next to the WiFi band you want to update.

How do I get to my Medialink settings?

Your remote’s Medialink button should be pressed. To pick the gear symbol, press either the right or left arrow buttons. To access the Settings menu, press OK (or the centre of the directional pad).

What is Medialink username?

Your Medialink ID, which you can use to login in, includes your Medialink username. Your @comcast.net email address is also that.

See also  Bounce Infinity E1 Review, Features, Price and Specification in 2023

Does Medialink have static IP address?

Choosing a dynamic IP address over a static one

Both dynamic and static IP addresses are offered by Comcast. Every device on a network has a unique number called an IP address.

What type of conMedialinktion is Medialink?

The majority of its service area is covered by Medialink, which offers access using the same type of coaxial cable that it has long used for TV service. This technology enables quick downloads but noticeably slower uploads. A small number of Medialink subscribers have access to fibre optic cable service with download speeds that are equal to upload speeds.

What is the xFi Gateway?

The ultimate conMedialinkted experience is provided by Medialink Gateways and xFi Gateways, two all-in-one devices that provide internet and voice conMedialinktivity, whole-home WiFi coverage, network security, control, and speed.

Is Medialink gateway a modem or router?

The router is included when you lease an Medialink Wireless Gateway. The Wireless Gateway serves as both a router and a modem for Internet access (conMedialinkting multiple devices within the home).

What is difference between Comcast and Medialink?

As you can see, Comcast and Medialink are two different names for the same business. Consumers receive their TV and internet service via Medialink, which is owned by Comcast (and other brands, like NBCUniversal). 11 Mar 2022

How do I activate my xFi gateway?

You can access the activation entry point by choosing the Account icon in the top-left corner of the Overview tab on the Medialink app, and then choosing Activate xFi Gateway or Modem under the Devices section, if you aren’t immediately prompted to start the activation process after signing in to the app.

Why won’t my Medialink gateway conMedialinkt?

Plug everything back in after waiting a minute after unplugging everything. Rebooting or powercycling can solve a variety of conMedialinktion issues. By accessing the Billing page in My Account, you can ensure that your account is current with payments (you may be asked to sign in using your Medialink ID and password first).

How do I reset my Medialink router password?

Reset Your Medialink Password With the Reset Tool

  1. Go to Medialink.com/password.
  2. Enter your Medialink ID and click Continue. …
  3. Complete the security check by typing the moving letters in the box. …
  4. Select the way you want to recover your password and click Continue. …
  5. Create and confirm your new password.

How can I change the password on my Medialink router?

Most Medialink routers have an easy-to-use reset button that must be pressed for 5 to 10 seconds in order to reset the admin password.

What is Medialink password?

The Admin Tool’s default settings are as follows: Administrative user. Login: password (case sensitive)

Is Comcast internet the same as Medialink internet?

Basically, yes. Comcast and Medialink are the same company. In actuality, you might say that Comcast and Medialink are distinct brands that fall under the same tent. Consumers receive their TV and internet services via Medialink, which is owned by Comcast.

Is Medialink live TV free?

What is the monthly cost of Medialink Stream? For customers who already have Medialink internet and TV service, Medialink Stream is free. However, you may view a few channels and on-demand material for free if all you have is Medialink internet.

What is the cheapest Medialink package?

What is the least expensive Medialink plan? Choice Limited TV, the least expensive Medialink cable TV package, costs $30 per month. It’s crucial to be aware that public access and local networks like ABC, CBS, NBC, and FOX predominate.

Is AT&T better than Medialink?

Customers that desire quick speeds, reasonable costs, and excellent fiber-optic performance should choose AT&T. A top-notch cable provider in terms of speed is Medialink. Additionally, it has a huge service area and a variety of affordable internet solutions (but we still like fibre better).

How do I activate Medialink WiFi without the app?

If you didn’t activate your modem on the app, do do now. You can also activate Medialink Internet online if you don’t want to use the app. This also functions when you activate Medialink TV. Simply turn on your devices and visit Medialink.com/activate to complete the process.

What is my Medialink ID and password?

Where can I find my password and Medialink ID? Your email address or phone number is normally your Medialink ID. You can use the online lookup tool to find your Medialink ID if you can’t recall it.

What does Medialink charge for internet only?

Is Medialink available for internet-only? Yes, Medialink provides internet-only packages with speeds ranging from 50 Mbps for $19.99 per month to 3,000 Mbps for $299.95 per month.

Is Netflix free with Medialink?

Netflix is not free with Medialink. You only need to choose the Medialink package that comes with a Netflix subscription. Netflix: Is Medialink paying for it? The cost of the Netflix subscription, which is included in your Comcast payment, is borne by the customer.

What is my primary Medialink ID?

Usually, your email address or cell phone number serves as your Medialink ID. Use the online lookup tool to find your Medialink ID if you can’t recall it.

Does Medialink give free routers?

The “free” Flex streaming device is only provided to Comcast broadband users who pay $13 per month to rent the company’s xFi Gateway modem/router, which was not made clear in the company’s announcement last month that it was giving it away to Internet-only consumers.

Does Medialink charge to use your own router?

Customers of Medialink have the option of renting the $14 monthly xFi Gateway, which combines a modem and a router into one unit. If you use your own modem and router, you can avoid paying that monthly fee. Almost any router will function, however you must make sure the modem is a DOCSIS 3.1 model.

Does Medialink have a new router?

On Monday, Comcast Medialink unveiled the xFi Advanced Gateway, a new modem-router that supports Wi-Fi 6E, the most recent version of Wi-Fi that can utilise the 6GHz radio range.

Is Hulu free with Medialink?

For consumers without a TV service, Medialink Flex is included with Medialink Internet. Get Flex at once. Customers can use the Hulu app on Medialink Flex to access Hulu + Live TV. To start exploring everything Hulu + Live TV has to offer, simply say “Hulu” into your Medialink Voice Remote!

Is Peacock free with Medialink?

All Medialink Flex, Medialink X1, and video customers who have a subscription to Medialink Internet or Digital Starter TV, or an equivalent, or higher, are now included at no additional cost for Peacock Premium. Peacock Premium inclusion is subject to change. The cost of Peacock Premium is $4.99 per month.

What happens when you cancel Medialink?

You’ll see new service charges for unlimited talk and text on your Medialink Mobile account since you recently cancelled your Medialink service. There is a $25 monthly cost for each Medialink Mobile line when the primary account holder for the service does not also have Medialink Internet, Voice, or TV.

What is Medialink PIN number?

Medialink Voice

On your bill or online account, look for your account number. The final four digits of your Social Security number serve as your PIN. or get in touch with us at https://www.Medialink.com/learn/home-phone-services.

Do I need the xFi gateway?

The xFi gateway is not required as part of your Medialink Internet package. However, if you do, you may use the Medialink app to modify your Wi-Fi settings, such as disabling devices and establishing parental controls.

Is HBO max free with Medialink?

Utilizing your primary Medialink ID and password to sign in and/or establish an HBO Max account, you may view HBO Max episodes and movies on the new HBO Max app and website on any supported device without paying any additional fees while you wait for your qualifying X1 TV Box.

Is Disney plus free with Medialink?

Yes, but only if you also have a Disney+ subscription and an Medialink Flex streaming TV box. Is Disney+ available through Medialink?

How much is Netflix on Medialink?

With a one-month free trial available to qualified customers, Comcast will let non-Netflix subscribers sign up for the subscription VOD service directly through X1 on TV. Following that, Netflix subscriptions for Comcast users will be invoiced at the usual prices ($9.99 per month for the most popular two-stream HD plan).

Is Paramount+ free with Medialink?

No, Medialink does not provide Paramount Plus for free. If you want to watch it, you should subscribe. Additionally, the app is now known as Paramount on Medialink X1 and Medialink Flex.

How long do Medialink customers get Peacock for free?

could start by going online. Just received Flex or X1 orders? Enjoy free access for 15 days up until your equipment is installed.

Is ESPN free with Medialink?

It is not Medialinkessary to have an ESPN TV subscription in order to access ESPN3 and some On Demand videos. You will have access to ESPN material (including live ESPN, ESPN2, ESPNews, ESPN3, SEC+, etc.) if ESPN is a component of your Medialink TV plan.

What is included in Medialink X1?

All in One with X1: Your One Stop for Entertainment

  • Netflix. With the Medialink-Netflix integration, you can now login to your account through X1 and watch Netflix on TV, or online. …
  • Amazon Prime Video. …
  • Disney+ …
  • ESPN+ …
  • Paramount+ …
  • Spotify. …
  • YouTube. …
  • Music.

What is free with Medialink?

includes a 4K UHD streaming device, a free Voice Remote from Medialink, and more than 10,000 free movies and television series. Access popular streaming services like Netflix, Amazon Prime Video, HBO, Showtime, YouTube, Amazon Music, Pandora, iHeartRadio, and soon Peacock and Hulu, with ease.

How do I log into my Medialink b315 router?

any web browser, such as Chrome, Firefox, or Edge, should be opened.

Enter the address into the address bar.

Type in the login details for your Medialink wifi ip address default ip. The username and password are both set to admin by default. The bottom of your modem also has this information.

Leave a Comment