When it is necessary to access large amounts of information, network connectivity can help expand your perspective. Making the network large enough on one end may be a technically poor choice because of the many security threats involved. As an alternative to this setup, interconnect routers seem to be the best option available.
Aside from connecting one router to another to expand the network and see the security pour in, it’s always easier to wire together pre-existing networks than to expand the existing network you have.
How to connect routers together?
When it comes to interconnecting routers, check the steps below to make sure the process is easier and easier, and that there are no technical glitches during the setup. The router interconnection setup has the following considerations:
Identify groups of routers to connect together, have a system to configure routers, an ethernet cable, extra power outlets
To set up your first router, connect it to your computer via an ethernet cable, turn on your modem and open your web browser and go to the admin panel and enable DHCP on Router 1. Test this network and disconnect to check if the router is working properly.
For Router 2, follow the steps above to disable DHCP and assign it a new IP address, set Router 2’s name and pass the key to Router 1.
These steps complete the process of setting up your router, and after managing those settings, start with the network. In fact, the modem and wifi router should be in the same configuration settings when you try to get the Netgear router to log in.
Networking after the routers are interconnected
The network setup is easier, you need to reboot router 2 and connect it to router 1 via ethernet cable. While router 1 is receiving an internet connection after turning on the modem, router 2 will also receive a signal, which indicates that the networks are interconnected through the routers.
Now, it’s time to connect the devices with their respective routers via wireless or ethernet cables. The choice is yours, but make sure everything is perfectly correct so that the chances of technical glitches are minimized.
Considerations to Make Router Interconnection Easier
You have to keep in mind some factors that help make this interconnection easier and better. Avoid the possibility of wrong settings, because in this case, the computer will not be able to connect to the router, which may cause other types of delays. After you set up your router, be sure to write down the IP addresses of all devices connected to your network, such as modems and computers.
In case the router gets disconnected, you will need to reconfigure it and set a static IP address for the device. You can also use the device’s DHCP switch, which will make the interconnection process easier.
Due to the benefits of router interconnection, many companies are adopting this interconnection technology in order to get better performance and faster data transfer in a cost-effective way. So that’s how interconnecting with routers makes things easier, ultimately expanding the range of benefits you can get from routers.