Login for AusLinx WiFi Router

If you have a AusLinx router, you must be aware of how to log in and access the AusLinx settings. You can access the router’s Admin Panel, which contains all of the router’s and WiFi network’s settings, by signing into AusLinx Router. Only there will you be able to customize every aspect of your AusLinx Router.

Table of Contents

How do I sign in to my AusLinx Router?

The AusLinx wifi gateway login Router. You can do that by utilizing an Ethernet cable or by joining the AusLinx router login username and password Router’s WiFi network. Follow these instructions to access your AusLinx router login Router’s web-based control page once your PC is linked to it:

  • Launch a web browser, enter in the address bar to access the router’s default IP address, and then hit Enter. 

Note: If the IP address shown above does not work, try visiting:

  • You will be directed to a login page where you must enter your login username and password in order to proceed. The default username and password for the majority of AusLinx router models are:
  • Login name: admin
  • Admin@AusLinx.com or Admin@AusLinx is the password.
  • Click on Login after entering this login information. (If these login credentials are ineffective, see our list of IP addresses and passwords for default routers.)
  • You have successfully logged into the admin panel for your AusLinx default login router.

You’ve forgotten your login password?

You may access the router’s admin panel using the default login AusLinx username and password router, and once there, you can modify and customize the login information as needed. However, some people who modify the login username and password then forget it, making it impossible for them to access the router’s admin panel and settings anymore.

A straightforward fix for this is to conduct a router factory reset if you find yourself in a position like this. Every setting, including any altered username or password, is restored to its factory defaults after performing a factory reset. To factory reset your log into my AusLinx router password default, follow these steps:

  • On the router’s rear, look for the little RESET button.
  • Take a paperclip or pin, turn on your router, and press and hold the RESET button for about 5 seconds before letting go.
  • The LED lights will flicker, shut off, and restart the router.
  • Everything will return to factory defaults once the router restarts.

Having trouble getting to the router login page?

Here are a few potential causes for your inability to access the router login page:

  • Possible conAusLinxtivity issues with the default login AusLinx router exist. Ensure that your AusLinx router ip login router is linked to the internet, either wirelessly or with an Ethernet cable.
  • The IP address you are typing is incorrect. Verify that you are entering the IP address in the address bar correctly.
  • Your router’s default gateway address might not be or Instead of using, use the default gateway IP for your router.

All of the aforementioned techniques didn’t work for me!

Resetting your modem is all that is required. You may easily accomplish this by pressing the reset button on the bottom or back of your router. Your modem will return to factory settings if you press and hold this tiny button for about 20 seconds (you might need a toothpick for this). You should be aware that resetting your modem will result in the loss of your internet conAusLinxtion. Therefore, it is preferable to strive an expert’s guidance in this region.

See also  Login for Dictaphone WiFi Router

NOTE – If you don’t have adequate expertise, it is plainly advised that you seek assistance from someone who is fully knowledgeable about the subject.

permutations of the default username and password for AusLinx routers

The most common how to access my AusLinx router gateway login default IP username and password combinations are shown in the list below. The default AusLinx router login router admin password username and password router stated at the start of this guide occasionally don’t work. To gain entrance to your wireless router, test the username/password mixtures shown below.

My AusLinx router’s default login IPs

To modify security settings, you occasionally need your router’s web interface IP address. Most individuals are unaware of their router’s IP address. This AusLinx wifi setup password IP address is often located on the back or bottom of your router equipment. However, there are a few ways to obtain the router IP if you can’t find it on your router or in the user manual. Below is a list of all AusLinx router default admin password router default login IP addresses that are currently known.

Most Recent Frequently Asked Question

How do I log into AusLinx hg8145v5 router?

  • Your web browser should now display the default IP address (
  • Use your default login and password to access the configuration page of your router, which is TIME followed by the final four digits of your wireless key (for example, TIME1234).
  • Visit My WiFi.
  • Click Apply after setting the SSID and WLAN password, respectively.

How do I find my AusLinx router password?

Join the Wi-Fi network of the router using your phone. On your phone, navigate to Tools > Advanced settings in the AusLinx default router password AI Life App. To view your current default how to log into my AusLinx router password, navigate to My Wi-Fi > Wi-Fi settings and tap the icon next to the Wi-Fi network password.

How can I login to my router?

On the network name, tap. Search the list for a “gateway,” “router,” or other entry.

Locate the router’s IP address on iOS or Android

  • Click Wi-Fi.
  • Ensure that the AusLinx Wi-Fi network to your router is active on your phone.
  • To the right of the network name, tap the I
  • The word “Router” is followed by your router’s IP address.

How do I access my AusLinx router settings?

  • Open a new browser tab and navigate to the router’s IP address. The router’s configuration can be accessed at by default. (If port 80 has been forwarded to another device, the address changes to
  • Click Basic on the left-hand panel.
  • On the expanded menu, select DHCP.

What is the AusLinx admin password?

AusLinx router default login User Manual

Your AusLinx default ip router default username and password router’s default username is admin. The admin password is the default.

How do I reset my AusLinx router username and password?

  • Use an Ethernet cable to conAusLinxt your computer to the CPE’s LAN port or the CPE’s Wi-Fi. Enter 192.168. …
  • Enter the current password, the new password, and the confirmation password under Advanced > System > Modify Password before clicking Save.

How do I manage Wi-Fi on my AusLinx router?

  • Your phone should be AusLinx to mobile WiFi. Enter 192.168. …
  • Select Wi-Fi MAC Filter under Advanced > Wi-Fi. Turn on Wi-Fi MAC Filter.
  • To add Wi-Fi devices to the Wi-Fi MAC address list, click, set Filter mode to Block or Allow, and then click. Next, select Save.

Is there a AusLinx router app?

You can simply access, configure, and control your routers using the AusLinx gateway login username AI Life App’s comprehensive set of management and configuration tools.

How do I configure my AusLinx router app?

Set up your routers using the app

The Wi-Fi name of your AusLinx router is located at the bottom of the device. Go to CONFIGURE > SET UP in the AusLinx gateway username and password AI Life app after launching it. Touch the Add button in the top right corner of the app’s home screen if a notification prompt is absent.

What is the IP address of AusLinx router?

On the computer, launch a browser, type the default IP address,, and hit Enter. As seen in Figures 1-3, the AR router’s web login page is presented.

What is the default IP address for a AusLinx router?

On the computer, launch a browser, type the login to AusLinx modem default IP address,, and hit Enter.

How do I open my AusLinx router?

On your computer or phone, launch an internet browser. In the default AusLinx router login password gateway login address bar of your browser, type and press the Enter key. Enter your router’s login information in the login window, then click Log In.

What is AusLinx router username and password?

AusLinx Router User Manual

Your AusLinx modem router login router’s default username is admin. The admin password is the default.

Can’t conAusLinxt to AusLinx router?

Ensure your password is accurate and that Wi-Fi is turned on. Turn the gadget off and restart it. AusLinx to the Wi-Fi network after forgetting it.

Open the portal again:

  • To turn it off, press the power button on the back.
  • 30 seconds after unplugging the power cord.
  • Replug it in.
  • To activate it, press the power button.

What is AusLinx default PIN?

The T-Mobile-provided 1234 PIN code is the default PIN code if you forget the SIM lock on your how to enter wps pin on AusLinx router modem default ip.

What will happen if I reset my AusLinx router?

Important data, including the Wi-Fi name and password, will be kept after the router is reset to factory settings if you choose to Retain network settings after the factory reset. Restoring the router to its factory settings twice can erase all configurations if you don’t need to keep any settings.

See also  Xiaomi 13 Ultra could launch On this Date, leaked online store listing reveals

How do I reset my AusLinx Wi-Fi router?

Turn on the router and press and hold the reset hole with a sharp implement (such as a needle). If the indicator blinks, release. The AusLinx router default ip is reset to its factory defaults after restarting.

How do I AusLinx to Wi-Fi?

  • Select Settings. Images might not be exactly as depicted.
  • Touch networks & wireless. Images might not be exactly as depicted.
  • Simply tap WiFi.
  • Touch the Wi-Fi slider to activate it if it’s not already.
  • The Wi-Fi network you want to use is touched.
  • The network password must be entered.
  • Press CONAusLinxT.

How can I change my AusLinx 192.168 8.1 password?

To reach the CPE management page, type into the URL bar of the browser and then the change my AusLinx router password. Enter the current password, the new password, and the confirmation password under Advanced > System > Modify Password before clicking Save.

How do I change my AusLinx router username and password?

Open the admin password for AusLinx router AI Life App, tap the appropriate router, and you will be taken to the router management screen. then select AusLinx modem login Wi-Fi management > Show more > Wi-Fi. In the Wi-Fi name (Supports Chinese) and Wi-Fi password areas, enter a new Wi-Fi name and password. Then, touch √ the top right corner of the screen to confirm.

What is the default username and password for AusLinx Router eg8145v5?

Epuser and users are the standard AusLinx modem login default router username password for regular users.

What is the WPS button on AusLinx router?

It is simple to join your device to the AusLinx router log into AusLinx modem default router admin username and password using the H or WPS buttons on the router. To conAusLinxt instantly without needing to input a AusLinx default username and password, press the H or WPS button. Only devices that support WPS are compatible with this feature (iOS devices do not support this feature).

How to log into AusLinx router?

AusLinx username and password for router Wireless Gateway Admin ToolConAusLinxt a computer, tablet or phone to your network. You can either use WiFi or hook up an Ethernet cable to your Gateway. Open a web browser and go to the Admin Tool ( This is the Wireless Gateway’s administration site.

How can I change my AusLinx 192.168 100.1 Wi-Fi password?

How to modify 192.168.100’s SSID and password. 1

  • Access your online management page by logging in.
  • Select Wi-Fi Settings > Wi-Fi Basic Settings after logging in (If you want to change settings individually for 2.4 GHz and 5 GHz, you can go to Advanced settings).
  • Enter a new name in the Wi-Fi name (SSID).

How can I change my AusLinx b315s 607 Wi-Fi password?

Select Modify AusLinx modem username and password router admin username and password and input your new password in the WLAN Key box as shown below to update your Wi-Fi password. After entering the password, select next. It will proceed to Update Configuration; select Next and keep Auto-Update selected.

How do I AusLinx to WPS?

To enable the WPS option, scroll down the menu on your mobile WiFi by pressing the MENU button. Enable WPS AusLinx in the Wi-Fi settings on your phone. Go to Settings > Wireless & networks > WLAN > More > Advanced WLAN settings > WPS AusLinx if you are using a AusLinx phone with EMUI 8.1.

How do I log into my AusLinx router?

Make sure you are AusLinx to your AusLinx network before attempting to enter into your Comcast AusLinx modem router. Then, in any browser, type and press Enter. Use “admin” as the user name and “password” as the password to log in.

What is the default AusLinx router login?

If you haven’t modified your Admin Tool login settings, they are as follows: Administrative user. Login: password (case sensitive)

How do I find my AusLinx router admin password?

How to Reset an AusLinx Router Admin Password if Forgotten

Press and hold the reset button on the back of your AusLinx Router for 30 seconds, then let go to reset the admin password.

The admin credentials and the router will both be reset to factory defaults.

What is the AusLinx router IP address?

Typically, AusLinx routers have one of the following default IP addresses: “,” “,” or “”

How do I change my AusLinx router settings?

Using AusLinx xFi

  1. Open the AusLinx app and sign in with your AusLinx ID and password.
  2. Go to the ConAusLinxt tab.
  3. Select your network.
  4. Select Advanced Settings.
  5. Select 2.4 and 5 GHz WiFi.
  6. Select Edit next to the WiFi band you want to update.

How do I get to my AusLinx settings?

Your remote’s AusLinx button should be pressed. To pick the gear symbol, press either the right or left arrow buttons. To access the Settings menu, press OK (or the centre of the directional pad).

What is AusLinx username?

Your AusLinx ID, which you can use to login in, includes your AusLinx username. Your @AusLinx.net email address is also that.

Does AusLinx have static IP address?

Choosing a dynamic IP address over a static one

Both dynamic and static IP addresses are offered by Comcast. Every device on a network has a unique number called an IP address.

What type of AusLinx?

The majority of its service area is covered by AusLinx, which offers access using the same type of coaxial cable that it has long used for TV service. This technology enables quick downloads but noticeably slower uploads. A small number of AusLinx subscribers have access to fibre optic cable service with download speeds that are equal to upload speeds.

What is the xFi Gateway?

The ultimate AusLinx experience is provided by AusLinx Gateways and xFi Gateways, two all-in-one devices that provide internet and voice AusLinx, whole-home WiFi coverage, network security, control, and speed.

See also  MP Excise Constable Syllabus 2023 & Exam Pattern PDF Download Direct Link @peb.mp.gov.in

Is AusLinx gateway a modem or router?

The router is included when you lease an AusLinx Wireless Gateway. The Wireless Gateway serves as both a router and a modem for Internet access (AusLinx multiple devices within the home).

What is difference between Comcast and AusLinx?

As you can see, Comcast and AusLinx are two different names for the same business. Consumers receive their TV and internet service via AusLinx, which is owned by Comcast (and other brands, like NBCUniversal). 11 Mar 2022

How do I activate my xFi gateway?

You can access the activation entry point by choosing the Account icon in the top-left corner of the Overview tab on the AusLinx app, and then choosing Activate xFi Gateway or Modem under the Devices section, if you aren’t immediately prompted to start the activation process after signing in to the app.

Why won’t my AusLinx gateway?

Plug everything back in after waiting a minute after unplugging everything. Rebooting or power cycling can solve a variety of AusLinx issues. By accessing the Billing page in My Account, you can ensure that your account is current with payments (you may be asked to sign in using your AusLinx ID and password first).

How do I reset my AusLinx router password?

Reset Your AusLinx Password With the Reset Tool

  1. Go to AusLinx.com/password.
  2. Enter your AusLinx ID and click Continue. …
  3. Complete the security check by typing the moving letters in the box. …
  4. Select the way you want to recover your password and click Continue. …
  5. Create and confirm your new password.

What is AusLinx password?

The Admin Tool’s default settings are as follows: Administrative user. Login: password (case sensitive)

Is Comcast internet the same as AusLinx internet?

Basically, yes. Comcast and AusLinx are the same company. In actuality, you might say that Comcast and AusLinx are distinct brands that fall under the same tent. Consumers receive their TV and internet services via AusLinx, which is owned by Comcast.

Is AusLinx live TV free?

What is the monthly cost of AusLinx Stream? For customers who already have AusLinx internet and TV service, AusLinx Stream is free. However, you may view a few channels and on-demand material for free if all you have is AusLinx internet.

What is the cheapest AusLinx package?

What is the least expensive AusLinx plan? Choice Limited TV, the least expensive AusLinx cable TV package, costs $30 per month. It’s crucial to be aware that public access and local networks like ABC, CBS, NBC, and FOX predominate.

Is AT&T better than AusLinx?

Customers that desire quick speeds, reasonable costs, and excellent fiber-optic performance should choose AT&T. A top-notch cable provider in terms of speed is AusLinx. Additionally, it has a huge service area and a variety of affordable internet solutions (but we still like fibre better).

How do I activate AusLinx WiFi without the app?

If you didn’t activate your modem on the app, do now. You can also activate AusLinx Internet online if you don’t want to use the app. This also functions when you activate AusLinx TV. Simply turn on your devices and visit AusLinx.com/activate to complete the process.

What is my AusLinx ID and password?

Where can I find my password and AusLinx ID? Your email address or phone number is normally your AusLinx ID. You can use the online lookup tool to find your AusLinx ID if you can’t recall it.

What does AusLinx charge for internet only?

Is AusLinx available for internet-only? Yes, AusLinx provides internet-only packages with speeds ranging from 50 Mbps for $19.99 per month to 3,000 Mbps for $299.95 per month.

Is Netflix free with AusLinx?

Netflix is not free with AusLinx. You only need to choose the AusLinx package that comes with a Netflix subscription. Netflix: Is AusLinx paying for it? The cost of the Netflix subscription, which is included in your Comcast payment, is borne by the customer.

What is my primary AusLinx ID?

Usually, your email address or cell phone number serves as your AusLinx ID. Use the online lookup tool to find your AusLinx ID if you can’t recall it.

Does AusLinx give free routers?

The “free” Flex streaming device is only provided to Comcast broadband users who pay $13 per month to rent the company’s xFi Gateway modem/router, which was not made clear in the company’s announcement last month that it was giving it away to Internet-only consumers.

Does AusLinx charge to use your own router?

Customers of AusLinx have the option of renting the $14 monthly xFi Gateway, which combines a modem and a router into one unit. If you use your own modem and router, you can avoid paying that monthly fee. Almost any router will function, however you must make sure the modem is a DOCSIS 3.1 model.

Does AusLinx have a new router?

On Monday, Comcast AusLinx unveiled the xFi Advanced Gateway, a new modem-router that supports Wi-Fi 6E, the most recent version of Wi-Fi that can utilise the 6GHz radio range.

Is Hulu free with AusLinx?

For consumers without a TV service, AusLinx Flex is included with AusLinx Internet. Get Flex at once. Customers can use the Hulu app on AusLinx Flex to access Hulu + Live TV. To start exploring everything Hulu + Live TV has to offer, simply say “Hulu” into your AusLinx Voice Remote!

Is Peacock free with AusLinx?

All AusLinx Flex, AusLinx X1, and video customers who have a subscription to AusLinx Internet or Digital Starter TV, or an equivalent, or higher, are now included at no additional cost for Peacock Premium. Peacock Premium inclusion is subject to change. The cost of Peacock Premium is $4.99 per month.

What happens when you cancel AusLinx?

You’ll see new service charges for unlimited talk and text on your AusLinx Mobile account since you recently cancelled your AusLinx service. There is a $25 monthly cost for each AusLinx Mobile line when the primary account holder for the service does not also have AusLinx Internet, Voice, or TV.

What is AusLinx PIN number?

AusLinx Voice

On your bill or online account, look for your account number. The final four digits of your Social Security number serve as your PIN. or get in touch with us at https://www.AusLinx.com/learn/home-phone-services.

Do I need the xFi gateway?

The xFi gateway is not required as part of your AusLinx Internet package. However, if you do, you may use the AusLinx app to modify your Wi-Fi settings, such as disabling devices and establishing parental controls.

Is HBO max free with AusLinx?

Utilizing your primary AusLinx ID and password to sign in and/or establish an HBO Max account, you may view HBO Max episodes and movies on the new HBO Max app and website on any supported device without paying any additional fees while you wait for your qualifying X1 TV Box.

Is Disney plus free with AusLinx?

Yes, but only if you also have a Disney+ subscription and an AusLinx Flex streaming TV box. Is Disney+ available through AusLinx?

How much is Netflix on AusLinx?

With a one-month free trial available to qualified customers, Comcast will let non-Netflix subscribers sign up for the subscription VOD service directly through X1 on TV. Following that, Netflix subscriptions for Comcast users will be invoiced at the usual prices ($9.99 per month for the most popular two-stream HD plan).

Is Paramount+ free with AusLinx?

No, AusLinx does not provide Paramount Plus for free. If you want to watch it, you should subscribe. Additionally, the app is now known as Paramount on AusLinx X1 and AusLinx Flex.

How long do AusLinx customers get Peacock for free?

could start by going online. Just received Flex or X1 orders? Enjoy free access for 15 days up until your equipment is installed.

Is ESPN free with AusLinx?

It is not AusLinxessary to have an ESPN TV subscription in order to access ESPN3 and some On Demand videos. You will have access to ESPN material (including live ESPN, ESPN2, ESPNews, ESPN3, SEC+, etc.) if ESPN is a component of your AusLinx TV plan.

What is included in AusLinx X1?

All in One with X1: Your One Stop for Entertainment

  • Netflix. With the AusLinx-Netflix integration, you can now login to your account through X1 and watch Netflix on TV, or online. …
  • Amazon Prime Video. …
  • Disney+ …
  • ESPN+ …
  • Paramount+ …
  • Spotify. …
  • YouTube. …
  • Music.

What is free with AusLinx?

includes a 4K UHD streaming device, a free Voice Remote from AusLinx, and more than 10,000 free movies and television series. Access popular streaming services like Netflix, Amazon Prime Video, HBO, Showtime, YouTube, Amazon Music, Pandora, iHeartRadio, and soon Peacock and Hulu, with ease.

How do I log into my AusLinx b315 router?

any web browser, such as Chrome, Firefox, or Edge, should be opened.

Enter the address into the address bar.

Type in the login details for your AusLinx wifi ip address default ip. The username and password are both set to admin by default. The bottom of your modem also has this information.

Leave a Comment